With the development of economy and the progress of technology, enterprises continue to improve production efficiency to meet market demand,fully automatic assembly machineAs a new type of machinery and equipment, it is favored by many enterprises.

1. preparation work 1. Place the workbench: place the workbench of the automatic assembly machine, the workbench should be solid and firm, provide good stability conditions, and prevent vibration.

2. On-site calibration: check whether various sensors, such as the rope encoder, are correct. If not, on-site calibration is required.

3. Check the conveyor belt: check whether the conveyor belt is installed correctly, check whether the conveyor belt is installed firmly, check whether the conveyor belt is damaged, and check whether the lead of the conveyor belt is in normal condition.

2. and debugging steps 1. Install software: Install the control software of the assembly machine and configure various parameters. If the parameter settings are not correct, it may affect the normal operation of the machine, so the parameter settings are very important.

2. Check the connector: After installing the software, check whether the connector is installed correctly. If the connector is not installed correctly, it will affect the normal operation of the assembly machine.

3. Check the cylinder: Check whether the cylinder is installed correctly and check whether the piston of the cylinder can move normally. These are all important guarantees for the normal operation of the assembly machine.

3. running status 1. Check the servo motor: After the assembly machine is started, check whether the servo motor can operate normally. If the servo motor is faulty, it will affect the normal operation of the assembly machine.

2. Check the operation interface: check whether the operation interface of the assembly machine is normal, the interface should be simple, and the buttons should be clear, which can improve the operation efficiency.

3. Check the controller: Check whether the controller is working properly. The controller is an important part of the assembly machine. If the controller fails, the assembly machine will not operate normally.

4. maintenance 1. Regular inspection: Regularly check whether the components of the assembly machine are damaged. If there is any damage, repair it in time to avoid affecting the normal operation of the assembly machine.

2. Cleaning and maintenance: Clean the body of the assembly machine regularly to keep the surface of the machine clean, which can extend the service life of the assembly machine.

3. Regular replacement: regular replacement of lubricating oil, replacement of lubricating oil can effectively reduce wear and ensure the normal operation of the assembly machine.

The automatic assembly machine can realize automatic feeding, automatic sorting, automatic processing, automatic detection, automatic packaging and other operations through the control system, which makes the enterprise reduce manpower in the production process, improve production efficiency, save a lot of time and cost, and realize the modernization of production. In addition, the fully automatic assembly machine can also be used by the laboratory in R & D and design to achieve product reliability, durability and other tests to ensure the quality of the final product, so as to better meet the needs of consumers.